Factory Reset - Cisco SPA Phones

Factory Reset - Cisco SPA Phones

• This step is not required for out-of-the-box phones, however, if the phone has been already used then it is a must.
• Open a new browser window and enter your phone IP address in order to access the phone web administration interface login screen. Example: http://192.168.1.22
• Login to phone web administration interface with your username and password. Please note, factory default login details are username: admin and password: admin
• For Cisco SPA phone mode SPA301 lift the handset and enter ****, enter 7373 and press #, press 1 to confirm, hang up to exit and begin the restore process, phone will be reset to the factory default settings.
• For Cisco SPA phone models SPA502G, SPA504G, SPA508G, SPA509G press the Setup button, scroll to Factory Reset and press select, phone will be reset to the factory default settings.
• For Cisco SPA phone model SPA501G press the Setup button, enter 73738, then press #, enter 1 to confirm, hang up to exit and begin the restore process, phone will be reset to the factory default settings.
• For Cisco SPA phone model SPA525G press the Setup button, select Device Administration, scroll to Factory Reset, press Select,  phone will be reset to the factory default settings.
• Wait sometime prior for device to reboot.
• NOTE Do not unplug or remove power to the phone while it is updating firmware and configurations .